Jump to content

Sulochana Dharma

Newbie
  • Content count

    19
  • Joined

  • Last visited

Community Reputation

1 Neutral

About Sulochana Dharma

  • Rank
    Newbie
  1. Up for sale are 3 unique Sr20det coffee tables, the perfect Christmas present for anyone: Many hours have gone into constructing these tables in order to obtain a high quality finish. Fully strpped down and cleaned block and head plus turbo and manifold. Includes tempered and fully polished glasstop. 1 x Anodised Green with Highmount turbo and Stainless manifold $550.00 1x Anodised Purple with Highmount turbo and Stainless Manifold $550.00 1x Metallic Gold $450.00 Can do two as a package (As Photoed) Located Bundoora (can deliever locally) Messege or call 0497599698
  2. Up for sale are 3 unique Sr20det coffee tables, the perfect Christmas present for anyone: Many hours have gone into constructing these tables in order to obtain a high quality finish. Fully strpped down and cleaned block and head plus turbo and manifold. Includes tempered and fully polished glasstop. 1 x Anodised Green with Highmount turbo and Stainless manifold $550.00 1x Anodised Purple with Highmount turbo and Stainless Manifold $550.00 1x Metallic Gold $450.00 Can do two as a package (As Photoed) Located Bundoora (can deliever locally) Messege or call 0497599698
  3. Forsale: S14a Nistune Ecu - $400 Z32 Afm - $100 Sard 550cc Injectors - $250 Made 230rwkw with this package + td06 Take the lot for $700 Located bundoora, Melbourne Txt/call 0497599698
  4. Sr20 Coffee Table

    Up for grabs are 3 sr20 coffee tables. Many hours have gone into constructing these tables in order to obtain a high quality finish. Fully stipped down and cleaned block and head plus turbo and manifold. Includes temepered and fully polished glasstop. 1 x Anodised Purple + turbo and manifold $550.00 1x Metallic Gold + turbo and maifold $550.00 1x Gloss Red $450.00 Can do two as a package (As Photoed) Located Bundoora (can deliever locally) Messege or call 0497599698
  5. Sr20 Coffee Table

    Up for grabs are 3 sr20 coffee tables. Many hours have gone into constructing these tables in order to obtain a high quality finish. Fully stipped down and cleaned block and head plus turbo and manifold. Includes temepered and fully polished glasstop. 1 x Anodised Purple + turbo and manifold $550.00 1x Metallic Gold + turbo and maifold $550.00 1x Gloss Red $450.00 Can do two as a package (As Photoed) Located Bundoora (can deliever locally) Messege or call 0497599698
  6. sr20det engine cut, check engine on, no spark

    No i put it to the top of the intake. Need to put it to put the tip on to a ground?
  7. So I had a issue where my car wasn't revving out before ended up sorting that out and getting the car going. But on the second test run we noticed the car was boosting out to 20psi(stock actuator) as we were driving all of a sudden the car cut out and engine light came on. Pulled the coil packs out put a spark plug on the end and noticed its not getting spark. So far im thinking CAS. Any ideas? Thanks in advance
  8. Sr20det Reving out Issue

    So I ended up getting it running properly(kinda). It ended up being o2 sensor or cas adjustment was too off. It ended up reving out and driving ok but hitting 20psi for some reason?(stock actuator) on the second run the car completely cut out and the check engine light came on. And now the cars not getting any spark.??
  9. Sr20det Reving out Issue

    On stock ecu, Checked cooler pipes and for vac leaks. Nothing to be found. Yea always. The flutter goes and comes somethimes.
  10. So I bought a s14 few weeks ago. Wasn't running when I bought it(no diff). So I got it started and It idles fine. I found when I drove it and went to rev past 4500-5000 it would really hesitate and bog down. Then I found I had a crack in the exhaust manifold(stainless). So I changed it with a stock manifold hoping this would have been what the issue was. Unfortunately it wasn't the issue, the car was still doing the same thing. So I pulled the spark plugs out to inspect them and found that they were white from running lean. So I changed fuel filter, Fuel pump,Afm, Injectors and fuel pressure reg(witha s14 sr20de frp which I think is the same) and the issue is still there. It also flutters through the pod filter on idle and when I inspected the plugs last time around I found that cylinder number 1's spark plug was black where as 2,3 and 4 were still white. Any Ideas on what might be causing this? With matusri 2 days away its a race against the clock. Thanks in advance
  11. I bought a s14a about two weeks ago. I bought the car with the diff out of the car but the guy gave me a r33 4.3 abs diff separate. So I dropped my subframe and changed the diff and subframe bushes and replaced them with solids also had the diff welded(track car). After I put the subframe back and went to attach the tailshaft to the Diff I relised there was a gap of about 8.5-9mm between the tailshaft and diff. Any ideas why? I know the Abs and non abs tailshaft have a differance of about 10mm, abs being shorter. If I have the incorrect tailshaft which would be the non abs it should be too long to attach to the diff not shorter... ?? Any ideas as to what the issue might be?
  12. Midnight purple 180sx Type X

    SOLD
  13. Midnight purple 180sx Type X

    Nuh sorry mate just cash
  14. Midnight purple 180sx Type X

    PRICE DROP $14500
  15. Midnight purple 180sx Type X

    DNAPOL, Sorry man just after cash. PMOD, yeah I had it up awhile ago , had a lot of interest but ended up deciding to keep it.
×